Welcome to the QuickDraw Forums

mhavlovick
Site Admin
Posts: 26
Joined: Fri May 01, 2015 6:51 am

Welcome to the QuickDraw Forums

Postby mhavlovick » Sat May 16, 2015 5:11 am

We just setup the forums just in time for the San Mateo Maker Faire!!!

On this forum you'll find information for QuickDraw assembly instructions, Sketchy Software instructions, and all sorts of other support information.

Thanks for stopping by and if you have questions we'll answer them as soon as we can.

Thanks again,

Matt Havlovick
Matt Havlovick
Owner/Maker - QuickDrawBot
http://www.quickdrawbot.com