Page 1 of 1

Sketchy 1.0.7 SDCard Image File

Posted: Sat Sep 05, 2015 6:45 am
by mhavlovick
The following are instructions on how to reinstall or create a new sdcard with the QuickDraw software (Sketchy Version 1.0.7)

1. Download the Image file from: http://www.quickdrawbot.com/downloads/Sketchy-1.0.7.zip (Around 1.6 Gigabytes)
2. Unzip the image file
3. If using Windows, download the "Win32 Disk imager" to flash the card: http://sourceforge.net/projects/win32diskimager/

Notes: Make sure you write the image to the correct drive!!

Use the information here to help with specific details on how to write the image to your sdcard: https://www.raspberrypi.org/documentation/installation/installing-images/README.md

Thanks,

Matt